Infrared BGA Rework Station ACHI IR-PRO-SC + Reballing Accessories Kit
the item you have requested is currently out of stock.
You can add this item to your
Weight: 42 kg
Voltage: 220 V
Warranty: 6 month
ACHI IR-PRO-SC Short Review: ACHI IR-PRO-SC repair station, designed specially for recovery of huge circuit plates such as motherboards + reballing accessories kit including a reballing station, 10 BGA stencils and solder balls.
ACHI IR-PRO-SC Infrared Soldering Station is an all-purpose repair kit, designed specially for recovery of huge circuit boards such as motherboards. With ACHI IR-PRO-SC you may easily install / uninstall chipsets on laptop motherboards, even difficult to repair ACER ones. "Three Rings of Death" - XBOX-360 problem - can be also solved with the help of ACHI IR-PRO-SC.
This infrared soldering station is used for recovering CBGA, CCGA, CSP, QFN, MLF, PGA components and other BGA-chips, as well as replacement of specific components (protective metal shield and plastic connectors).
- Soldering station can be connected to PC through RS232 serial port.
- The soldering station can be programmed and controlled via software included in package.
- 10 temperature curves can be stored at the same time.
- Independent temperature sensors for upper and lower heaters and automatic temperature stabilization system with feedback and PID-control.
|Circuit Board Dimensions||65 × 65 mm|
|Lower Preheater Dimensions||260 × 245 mm|
|Power Consumption||2500 W|
|Power Input||220 V, 50/60 Hz|
|Dimensions||475 × 480 × 420 mm|
ACHI IR-PRO-SC BGA Rework Station
- ACHI IR-PRO-SC infrared soldering station — 1 pc.
- Data cable — 1 pc.
- Adhesive reflective foil — 1 pc.
- User manual — 1 pc.
- CD with demonstration video — 1 pc.
Reballing Accessories Kit
- Reballing station — 1 pc.
- Amtech soldering flux — 1 pc.
- Solder balls (2500 pcs/pack)
- 0.3 mm — 1 pc.
- 0.35 mm — 1 pc.
- 0.4 mm — 1 pc.
- 0.45 mm — 1 pc.
- 0.5 mm — 1 pc.
- 0.55 mm — 1 pc.
- 0.6 mm — 1 pc.
- 0.76 mm — 1 pc.
- Vacuum pick-up tool — 1 pc.
- Kapton tape — 1 pc.
- Goot CP-2015 desoldering wick — 1 pc.
- Brush — 1 pc.
- Scraper — 1 pc.
- BGA stencils — 10 pcs.
- Universal 0.3 mm
- Universal 0.35 mm
- Universal 0.4 mm
- Universal 0.45 mm
- Universal 0.5 mm
- Universal 0.55 mm
- Universal 0.6 (pitch = 1.0 mm)
- Universal 0.6 (pitch = 0.9 mm)
- Universal 0.6 (pitch = 1.1 mm)
- Universal 0.76 (pitch = 1.27 mm)
comments powered by Disqus