Network Toner & Probe Kit Pro'sKit MT-7071K
Weight: 1.8 kg
Warranty: 6 month
Pro'sKit MT-7071K Short Review: Includes a toner, a probe and 8+1 remote units. Measuring cable length up to 1200 m. Wire Tracing up to 3 km.
Pro'sKit MT-7071K Network Toner & Probe Kit is used for all installation and maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling, etc.
- Cable Length Measurement up to 1200 m
- Measuring cable length to opens up to 1200 m. Calibration accuracy: ±3%
- Length measurement in feet, yards or meters
- Calibration Parameters
- Can determine actual calibration parameters with known length of cable for cable length test
- Allows setting 1-7 calibration parameters
- Wire Tracing up to 3 km
- The tone and probe kit allows easy tracking wire directly in connection with live telecommunication equipment and router
- Cable Mapping & Status Indication
- Display the result of pin to pin cable mapping
- Display cable status and troubleshoot wiring for continuity, shorts, opens and crossover.
- Max support of up to 8 remote units
- Non Contact Voltage Detection
- Tests voltage from 90 ~ 1000V, special design to make sure the power is off before testing for circuit protection
|Cable types||RJ45 Lan cable Cat 5、5e、6、7 (UTP/STP)、RJ11/12 Telephone cable Cat 3 (2/4/6 pin)、Coaxial cable & normal solid/stranded wire|
|Cable test modes||1 KHz two-note tones for location and isolating cables, wire mapping for validate (detects wire continuity, shorts, opens, miswired, crossover) and open length tested|
|Measurement technology||Cable capacitance method|
|Max. distance to opens for test||1,200 meters (4,000 feet/1,300 yard)|
|Min. distance to opens for test||Split pairs：1 meter (3 feet)、Other cable：1.25 meter (4 feet)|
|Typical accuracy of length test||±3.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard)|
|Calibration accuracy of length test||±2.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard), standard cable ＞10 meter|
|Resolution & Unit of length test||0.1 meter/ feet/ yard, Rate：1~3 sec./time|
|Calibrating parameters memory||1~7 sets, allowing rewrite by new calibrating parameters|
|Max. distance of transmission & cable map||≧3 km (1 kHz) & 300 m|
|Other functions||Continuity test, live telecommunication equipment test and router test, voltage protection AC 60V or DC 48V, Auto power off, Low battery display|
|Dimensions (L×W×D)||138×80×35 mm|
|Signal status indication||1 kHz , 1 LED & Buzzer, bulding ear jack|
|NCV indication & LED illumination||1 LED (AC90~1000V) & 1 LED|
|Dimensions (L×W×D)||198×45×33 mm|
|Remote Unit Specifications|
|Compatible connectors||RJ45 (8 pin)、RJ11/12 (6 pin)、BNC connectors|
|Dimensions (L×W×D)||90×32×30 mm|
- Toner — 1 pc.
- Receiver — 1 pc.
- Remote unit — 1+8 pcs.
- RJ45 cable patch cord — 1 pc.
- RJ11/12 cable patch cord — 1 pc.
- Alligator clips patch cord — 1 pc.
- Earphones — 1 pc.
- Pouch bag — 1 pc.
comments powered by Disqus