RF Signal Generator RIGOL DSG3060

USD 9799

Dear customer,
the item you have requested is currently out of stock.
You can add this item to your
Waiting list
Notify when in stock

Code: 844216
Voltage: 110 V, 220 V
Warranty: 36 month
Availability in stock: HKEUCN

RIGOL DSG3060 Short Review: High-performance RF signal generator which provides standard AM/FM/ØM analog modulation, as well as options for I/Q modulation and I/Q baseband output. DSG3060 has a maximum frequency of 6 GHz.

DSG3000 is the first RF signal source series from RIGOL. These devices offer standard AM/FM/ØM analog modulation, as well as options for I/Q modulation and I/Q baseband output. RIGOL DSG3060 has a maximum frequency of 6 GHz and feature a high signal purity with phase noise measuring.

Features

  • Maximum frequency – 6 GHz
  • Amplitude accuracy: <0.5 dB
  • Output amplitude range: -130 dBm to +13 dBm
  • High signal purity, phase noise: < -110 dBc/Hz @ 20 kHz
  • Optional I/Q modulation and I/Q baseband outputs
  • Standard AM/FM/ØM modulation. Standard pulse modulation
  • USB/LAN/GPIB interfaces standard. Supports LXI-C and SCPI command set

Technical Specifications

Frequency
Frequency range 9 kHz ~ 6 GHz
Resolution 0.01 Hz
Frequency switching speed <10 ms (typ.)
Phase offset Adjustable in 0.01° steps (nom.)
Frequency Bands
Band Frequency N
1
2
3
4
5
6
7
8
9
f ≤ 23.4375 MHz
23.4375 MHz < f ≤46.875 MHz
46.875 MHz < f ≤ 93.75 MHz
93.75 MHz < f ≤ 187.5 MHz
187.5 MHz < f ≤ 375 MHz
375 MHz < f ≤ 750 MHz
750 MHz < f ≤ 1500 MHz
1500 MHz < f ≤ 3000 MHz
3000 MHz < f ≤ 6000 MHz
1
0.03125
0.06625
0.125
0.25
0.5
1
2
4
Internal Reference Frequency
Reference frequency 10 MHz
Temperature stability (0 °C to 50 °C, reference to 25 °C) < 0.5 ppm
< 5 ppb (with OCXO-A08 option)
Aging rate < 1 ppm/year
< 30ppb/year (with OCXO-A08 option)
Output for internal reference frequency Frequency 10 MHz
Level +8 dB (typ.)
Output impedance 50 Ω (nom.)
Input for external reference frequency Frequency 10 MHz
Level 0 dB ...+10 dB (typ.)
Input impedance 50 Ω (nom.)
Maximum deviation ±5 ppm
Frequency Sweep
Operating modes Step sweep (equally or logarithmically spaced frequency steps)
List sweep (the list of arbitrary frequency steps)
Sweep modes single, continuous
Sweep range full frequency range
Sweep shapes triangle, ramp
Step change linear or logarithmic
Number of points step sweep: 2...65535
list sweep: 1...6001
Dwell time range 20 ms...100 s
Triggering Auto, trigger key, external, bus (GPIB, USB, LAN)
Spectral Purity
Harmonics (CW mode, 1 MHz ≤ f ≤ 6 GHz, level ≤+13 dBm) < -30dBc
Sub harmonics (CW mode) f ≤ 3 GHz < -65 dBc, < -80 dBc (typ.)
3 GHz < f ≤ 6 GHz < -52 dBc, <- 70 dBc (typ.)
Non harmonics (CW mode, level > -10 dBm, carrier offset >10 kHz) f ≤ 1.5 GHz < -64 dBc, < -70dBc (typ.)
1.5 GHz < f ≤ 3 GHz < -58 dBc, < -64 dBc (typ.)
3 GHz < f ≤ 6 GHz < -52 dBc, < -58 dBc (typ.)
SSB phase noise (CW mode, at 20 kHz carrier offset, 1 Hz measurement bandwidth) f = 100 MHz < -120 dBc/Hz
f = 1 GHz <-108 dBc/Hz, < -110 dBc/Hz (typ.)
f = 3 GHz < -102 dBc/Hz, < -104 dBc/Hz (typ.)
f = 6 GHz < -96 dBc/Hz, < -98 dBc/Hz (typ.)
Residual FM (CW mode, RMS value at f= 1GHz) 0.3 kHz to 3 kHz <5 Hz rms, <1 Hz rms (typ.)
0.03 kHz to 20 kHz <30 Hz rms, <8 Hz rms (typ.)
Level
Setting Range
Specification level range Setting range
Maximum output level 9 kHz ≤ f <100 kHz +7 dBm +10 dBm
100 kHz ≤ f <1 MHz +13 dBm +15 dBm
1 MHz ≤f ≤3 GHz +13 dBm +25 dBm
3 GHz < f ≤6 GHz +13 dBm +20 dBm
Minimum output level 9 kHz ≤ f <100 kHz -110 dBm -120 dBm
100 kHz ≤ f ≤ 6 GHz -130 dBm -140 dBm
Absolute Level Uncertainty
+13 ~ -60 dBm -60 ~ -110 dBm -110 ~ -130 dBm
Level uncertainty 9 kHz ≤ f <100 kHz ≤ 0.5 dB (typ.) ≤ 0.7 dB (typ.)
100 kHz ≤ f ≤3 GHz ≤ 0.7 dB,
≤0.5 (typ.)
≤0.9 dB,
≤0.5 (typ.)
≤0.7 dB (typ.)
3 GHz < f ≤6 GHz ≤ 0.9 dB,
≤0.5 (typ.)
≤1.1 dB,
≤0.5 (typ.)
≤0.9 dB (typ.)
VSWR <1.8 (typ.)
Level Setting
Setting time
(ALC state on, frequency fixed, temperature: 20 °C to 30 °C)
≤ 5 ms (typ.)
Uninterrupted level setting range
(ATT fixed mode, ALC state on, level range -110 dBm to +13 dBm
> 20 dB (typ.)
Reverse Power
Max. reverse power max. DC voltage - 50 V
1 MHz < f ≤ 6 GHz - 10 W
Level Sweep
Operating modes step sweep (equally spaced level steps)
list sweep (the list of arbitrary level steps)
Sweep modes single, continuous
Sweep range full level range
Sweep shapes triangle, ramp
Step change linear
Number of points step sweep: 2...65535
list sweep: 1...6001
Dwell time range 20 ms...100 s
Triggering Auto, trigger key, external, bus (GPIB, USB, LAN)
General
Display 4.3 inch TFT LCD (480×272)
Memory mass memory: flash non-volatile memory (internal); USB disk (not supplied)
data storage space: flash non-volatile memory (internal), 1 GB
Power Supply 100 V to 240 V (nom.), 45 Hz to 440 Hz
Dimensions (W × H × D) 364 × 112 × 420 mm (14.33 × 4.41 × 16.54 in)
Weight 6.4 kg (14.1 Ib)

Additional Information

Download RIGOL DSG3060 User Guide.

Download RIGOL DSG3060 Data Sheet.

Standard Accessories

  • RIGOL DSG3060 signal generator (1 pc.)
  • Power cable (1 pc.)
  • Quick start guide (1 pc.)
  • CD (1 pc.)

comments powered by Disqus
Sales chat
Hot news
Subscription to ToolBoom Newsletter
Customers Feedback
Currency: US dollar
Cart your cart is empty
 
ToolBoom Online Store does not sell the chosen item(s) in your country.