Phone Tester Pro'sKit MT-8100

id: 823539
0.9 kg Warranty: 6 month (s)
Line voltage test, continuity test, two-way hands-free amplified speakerphone, speed dialing, low battery indicator and a rugged locking belt clip.
sales team
sales team
Impossible to estimate the shipping cost

Pro'sKit MT-8100 phone tester is used by installers and repair technicians to test copper wire voice subscriber lines. Pro'sKit MT-8100 phone tester is easy to use, features line voltage test, continuity test, two-way hands-free amplified speakerphone, speed dialing, low battery indicator and a rugged locking belt clip.

Pro'sKit MT-8100 Phone Tester User Manuals

Download Pro'sKit MT-8100 phone tester user manual

Pro'sKit MT-8100 Phone Tester Features

  • Dust- and waterproof, drop protection
  • Outer-lead voltage, battery low voltage and continious polarity LED indicators
  • On/off checking feature for telecom line connections
  • Speakerphone for convenient hands-free two-way conversation
  • Tone and pulse operation
  • Store up to twelve 16-digit numbers in repeat dialer (speed dialing), plus extra number store in M1 button
  • Last number redial feature
  • PBX pause button and mute switch
  • Electronic switch for speakerphone/monitor volume control
  • Automatic shut-off after five minutes of inactivity
  • Relocatable steel locking belt clip
  • Audible electronic ringer
  • Angled bed of nails for stabbing into the cable, and the auxiliary RJ-11 modular plug for direct insertion into telecom jack

Pro'sKit MT-8100 Phone Tester Technical Specifications

Loopspan limit 2 kΩ maximum at 48 V DC
(nominal 20 mA minimum loop current)
DC resistance
Talk mode 300 Ω typical
Monitor impedance 39 kΩ nominal at 1 KHz
Rotary dial output
Pulsing rate 10 pps + 0.8 pps
Percent break 61%±2%
Interdigit interval 1000 ms typical
Leakage during break >50 KΩ
DTMF output
Tone frequency error ±1.2% maximum
Tone level -8±2 dBm combined (typical)
High versus low tone difference 4 dB maximum
Memory dialing
Memory capacity 13 memories including M1, last number redialing
Digit capacity 16 digits per memory
PBX pause duration 4 seconds
Line voltage test 5 phase AC/DC voltage indication
Monitor amplifier power source 9 V transistor; provides 25 hours continuous use, typical
Automatic power shut off after 5 min. of no audio signal
Speaker phone levels electronic adjustable
Power source battery (9V) 6F22 (not included)
Physical characteristics
Measurement 230 × 82 × 89 mm
(9-1/16” × 3-15/64” × 3-1/2”)
Weight 635 g typical
Water resistance dust protection & waterproof tested to an IEC/EN 60529 IP54 rating
Cord sets angled bed of nails and RJ11 plug
Environmental conditions
Temperature operating: 0 to 50°C
  storage: <-10 to 60°C
Relative humidity 5 to 95%
Certificate IP54, CE approved

Pro'sKit MT-8100 Phone Tester Package

  • Butt set tester (1 pc.)
  • Line cord with angled bed of nails and RG-11 plug (1 pc.)
  • Replacement fuse (2 pcs.)
  • User's manual (1 pc.)

Customers Feedback

Chat with us
English Offline Español Offline Русский Offline Technical Support Offline
See the entire catalogue
You have no
Sales chat
 English offline
 Español offline
 Русский offline
 Technical Support offline
No items in compare list
Sales chat