Infrared BGA Rework Station ACHI IR-PRO-SC + Reballing Accessories Kit

id: 846594
35 kg 220 V Warranty: 6 month (s)
ACHI IR-PRO-SC repair station, designed specially for recovery of huge circuit plates such as motherboards + reballing accessories kit including a reballing station, 10 BGA stencils and solder balls.
USD 950.00
Notify
when in stock
USD 950.00
Notify
when in stock
Add to wishlist
Compare
Compare
Impossible to estimate the shipping cost
Overview
Specifications
Delivery
Payment
Warranty
Overview

ACHI IR-PRO-SC Infrared Soldering Station is an all-purpose repair kit, designed specially for recovery of huge circuit boards such as motherboards. With ACHI IR-PRO-SC you may easily install / uninstall chipsets on laptop motherboards, even difficult to repair ACER ones. "Three Rings of Death" - XBOX-360 problem - can be also solved with the help of ACHI IR-PRO-SC.

This infrared soldering station is used for recovering CBGA, CCGA, CSP, QFN, MLF, PGA components and other BGA-chips, as well as replacement of specific components (protective metal shield and plastic connectors).

Features

  • Soldering station can be connected to PC through RS232 serial port.
  • The soldering station can be programmed and controlled via software included in package.
  • 10 temperature curves can be stored at the same time.
  • Independent temperature sensors for upper and lower heaters and automatic temperature stabilization system with feedback and PID-control.

Technical Specifications

Circuit Board Dimensions 65 × 65 mm
Lower Preheater Dimensions 260 × 245 mm
Power Consumption 2500 W
Power Input 220 V, 50/60 Hz
Dimensions 475 × 480 × 420 mm
Weight 20 kg

Package Contents

ACHI IR-PRO-SC BGA Rework Station

  • ACHI IR-PRO-SC infrared soldering station — 1 pc.
  • Data cable — 1 pc.
  • Adhesive reflective foil — 1 pc.
  • User manual — 1 pc.
  • CD with demonstration video — 1 pc.

Reballing Accessories Kit

  • Reballing station — 1 pc.
  • Amtech soldering flux — 1 pc.
  • Solder balls (2500 pcs/pack)
    • 0.3 mm — 1 pc.
    • 0.35 mm — 1 pc.
    • 0.4 mm — 1 pc.
    • 0.45 mm — 1 pc.
    • 0.5 mm — 1 pc.
    • 0.55 mm — 1 pc.
    • 0.6 mm — 1 pc.
    • 0.76 mm — 1 pc.
  • Vacuum pick-up tool — 1 pc.
  • Kapton tape — 1 pc.
  • Goot CP-2015 desoldering wick — 1 pc.
  • Brush — 1 pc.
  • Scraper — 1 pc.
  • BGA stencils — 10 pcs.
    • Universal 0.3 mm
    • Universal 0.35 mm
    • Universal 0.4 mm
    • Universal 0.45 mm
    • Universal 0.5 mm
    • Universal 0.55 mm
    • Universal 0.6 (pitch = 1.0 mm)
    • Universal 0.6 (pitch = 0.9 mm)
    • Universal 0.6 (pitch = 1.1 mm)
    • Universal 0.76 (pitch = 1.27 mm)
Specifications
Upper Heater Size
  • 8x8 cm
Bottom heater size
  • 26x24 cm
Heater Type
  • with ceramic emitter
Total power
  • 2500 W
Control type
  • microcontroller / PC synchronization
Upper heater type
  • ceramic
Bottom heater type
  • ceramic
Upper heater power
  • 400 W
Delivery
Payment
Warranty

Customers Feedback

Chat with us
English Online Español Offline Русский Offline Technical Support Online
See the entire catalogue
Cart
You have no items in cart
Sales chat
 English online
 Español offline
 Русский offline
 Technical Support online
Contacts
Phone:
Email:
Compare
No items in compare list
Cart
Sales chat
Contacts
Compare