LED Standalone Controllers

LED symphony controller with radio remote control for RGB LED strips (WS2812B, WS2811). Equipped with DIY function.

Slave controller that transmits data based on Ethernet protocol, can be connected to computer or master controller. Max. number of pixels: 8192.

Designed for controlling 5050 LEDs with various IC chips via two channels with 1024 pixels each. Max. number of pixels: 2048.

Designed for controlling variety of ICs with 4 channels. IR remote control and a built-in segment display. Max. number of pixels: 6144.

Designed for controlling variety of single-line and double-line chips using Android app via WiFi connection. Max. number of pixels: 2048.

Designed for controlling variety of single-line and double-line ICs with one port. High-efficiency model, four operation modes. Max. number of pixels: 2048.

Designed for controlling variety of ICs with one channel. IR remote control and a built-in segment display. Max. number of pixels: 4096.

LED controller with Bluetooth control via Android/iOS smartphone for RGB LED strips (WS2801, WS2811, WS2812, WS2813). Voltage: 5-24 V.

This controller converts the Ethernet signal into SPI pixel signal, as well as outputs DMX512 signal for various LED lights.

Allows controlling and displaying text/images on LED RGB modules. Max. number of pixels:8192.

Designed for controlling DMX consoles using special software. Maximum number of controlled pixels is 4096.

Slave controller that transmits data based on Ethernet protocol, can be connected to computer or master controller. Max. number of pixels: 4096.

LED RGB controller with SD card, supports DMX 512 and various types of ICs. Control via Ethernet connection.

LED controller with Wi-Fi control via Android/iOS smartphone for RGB LED strips. Voltage: 5-24 V.

LED controller with Bluetooth control via Android/iOS smartphone for RGB LED modules and strips (WS2811, WS2812B, WS2813, SK6812). Max. number of pixels: 960.

LED controller with Bluetooth control via Android/iOS smartphone for RGB LED strips. Voltage: 5-12 V.

LED RGB controller with SD card, supports DMX 512, WS2811, WS2801, WS2812B and other ICs. Maximum number of pixels: 2048.

This controller converts the Ethernet signal into SPI pixel signal, as well as outputs DMX512 signal for various LED lights.

Allows controlling and displaying text/images on LED RGB modules. Max. number of pixels:400000.

SP608E LED controller with radio remote control for SMART LED strips (WS2811 / WS2812B). Equipped with a built-in microphone.

LED controller with Wi-Fi control via Android smartphone for RGB LED strips. Voltage: 5-24 V.

LED Symphony Controller with IR remote control for RGB LED strips (WS2811, WS2812). Voltage: 5 V.

This device can control up to 192 DMX512 channels and is used to program and operate stage lights.

LED symphony controller with radio remote control for RGB LED strips (WS2811, WS2812, WS2813). Voltage: 5-24 V.