Fusion Splicer Fujikura 62S+

id: 862926
Made in Japan
17.5 kg 110, 220 V Warranty: 24 month (s)
Fusion splicer for SM, MM, DS, NZDS fibers. Splicing time: 6-10 s. Heating time: 23 s. Wind protector and tube heater design. Equipped with Bluetooth technology.
sales team
sales team
Add to wishlist
Impossible to estimate the shipping cost

Fujikura 62S+ Fiber Optic Fusion Splicer provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment models Fujikura 70S+, Fujikura 62S+ includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the device ensures a high level of productivity.

The 62S+ is also equipped with Bluetooth technology. This allows the splicer to actively communicate with Bluetooth enabled fiber preparation accessories making maintenance of fiber preparation tools easier than ever!

Battery capacity is 200 splices/shrinks. The carrying case doubles as a built-in or mobile workstation and makes splicing easier than ever.

Fujikura 62S+ Fiber Optic Fusion Splicer is compatible with Fujikura CT-50A Fiber Optic Cleaver and Fujikura CT-08A Fiber Optic Cleaver (not included).


  • Bluetooth wireless communication
  • 5,000 splices electrode life
  • 23 second tube heating time with standard sleeves
  • Fully ruggedized for shock, dust and moisture
  • Li-ion battery with 200 splices/shrinks per charge
  • Internet software upgrades
  • Multi-function carrying case with integrated workstation

Technical Specifications

Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651.1), DS (G.653), CS (G.654), NZDS (G.655 & G.656) and Erbium-doped fiber
Cladding Diameter 80 μm to 150 μm
Coating Diameter 100 μm to 1,000 μm
Fiber Cleave Length 5 to 16 mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards
Splicing Time ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber
Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core axis alignment data
Storage of Splice Result Last 10,000 results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 320X for single X or Y view, or 200X for X and Y view
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves
Protection Sleeve Length 60 mm, 40 mm, micro
Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated
Electrode Life 5,000 Arc Discharges
Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
Wind Protection Maximum wind velocity of 15 m/s (34 mph)
Operating Conditions 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25N
Dimensions, W × D × H 146 × 159 × 150 mm / 5.75 × 6.25 × 5.9 inches
Weight 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

Package Contents

  • Fujikura 62S+ Fiber Optic Fusion Splicer — 1 pc.
  • BTR-09 Battery — 1 pc.
  • DCC-18 Battery Charge Cord — 1 pc.
  • ADC-18 AC Adapter — 1 pc.
  • ACC-14 AC Cord — 1 pc.
  • ELCT2-20A Spare Electrodes — 1 pair
  • S21A Sheath Clamp — 1 pc.
  • Sleeve Loader — 1 pc.
  • USB Cable — 1 pc.
  • Alcohol Pot — 1 pc.
  • Screwdriver — 1 pc.
  • Splicer Carrying Strap — 1 pc.
  • Quick Reference Guide — 1 pc.
  • Video Instruction Manual — 1 pc.
  • CC-24 Transit Case with Carrying Strap — 1 pc.
Fusion Splicer Fujikura 62S+ - Short description
Fusion Splicer Fujikura 62S+
sales team

Customers Feedback

Chat with us
English Online Español Online Русский Offline Technical Support Offline
See the entire catalogue
You have no
Sales chat
 English online
 Español online
 Русский offline
 Technical Support offline
No items in compare list
Sales chat