Fusion Splicer Fujikura 70S
id: 855676
Fusion Splicer Fujikura 70S
Overview
Description
Video
Delivery
Payment
Warranty
Discontinued
Overview

Made in Japan
18.5 kg 110, 220 V Warranty: 24 months
Core-to-core alignment single fiber splicer designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing time: 7 s, heating time: 14 s. Read more
Discontinued
Description

Fujikura 70S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing takes only 7 seconds, and heating takes only 14 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 110/220 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.
Features
- Splices all known types of fibers.
- Fiber core alignment.
- Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
- Reduced splicing time – 7 seconds only.
- Heating time – 14 seconds only.
- Increased electrode lifetime – up to 3000 splicing cycles with one set, without splicing quality loss.
- Battery life increased up to 200 full splicing/heating cycles.
- Rotary color anti-glare LCD 4.73", high contrast and vividness.
- Simultaneous display of X and Y axes.
- May splice SC, LC, MPO connectors.
- Automatic: wind-protective lid, heater, fiber holders.
- Increased water, dust and shock resistance, may be used under severe environment conditions.
- Automatic arc calibration.
- Battery BTR-09 is included.
- New comfortable carrying case, optimized for quick operation start.
- The case may be used as a working table.
- Operation manual is installed into the splicer.
- Software update option.
- 2 years of full warranty with the device replacement.
Technical Specifications
Fujikura 70S |
||
Splicing / Heating | ||
---|---|---|
Typical Splicing Time | 7 sec (for SM) | |
Typical Heating Time | 14 sec (for 60 mm sleeves) | |
Applicable Fibers | SMF (ITU-T G.652) MMF (ITU-T G.651) DSF (ITU-T G.653) NZDSF (ITU-TG.655) CSF (ITU-T G.654) Fiber with low sensitivity to bends (ITU-T G.657) Erbium-doped fiber |
|
Cladding Diameter | 80 μm – 150 μm | |
Coating Diameter | 100 μm – 1,000 μm | |
Fiber Cleave Length | 5 – 16 mm | |
Typical Average Splice Loss | 0,02 dB (SMF) 0,01 dB (mmF) 0,04 dB (DSF) 0,04 dB (NZDSF) |
|
Splice Loss Estimate | core angular offset fiber deformation |
|
Return Loss | ≤60 dB | |
Compatible Protection Sleeves | 60 mm 40 mm micro |
|
Splicing Modes | 100 user programmable | |
Heating Modes | 30 (10 preset + 20 user programmable) | |
Internal Memory | up to 2000 splice results and parameters | |
Additional Options | ||
Mechanical Proof Test | stretching force 1.96 – 2.25 N | |
Electrodes lifetime | 3000 cycles | |
External Interfaces | USB 1.1, Mini-DIN | |
Data Display | ||
Screen type | rotary anti-glare LCD | |
Screen Size | 4.73" | |
Colour | Yes | |
Viewing | Yes (2 CMOS cameras) | |
Magnification | х200 | |
Power Supply | ||
Adapter ADC-19 | 110/220 V AC | |
Battery BTR-09 | 4000 mAh | |
Battery Cycles | up to 200 splicing/heating cycles | |
Operation Conditions | ||
Temperature | –10 ~ +50°C | |
Altitude above sea level | 0 ~ 5000 m | |
RH | 0 ~ 95% | |
Max. wind velocity | 34 mph / 15 m/s | |
Storage Conditions | ||
Temperature | –40 ~ +80 °C | |
RH | 0 ~ 95% | |
Protection | ||
Shock Resistance | height: 76 cm, any surface | |
Dust Resistance | dust particles from 0.1 to 500 μm | |
Rain Resistance | 10 mm/h for 10 min | |
Dimensions & Weight | ||
Width | 150 mm | |
Length | 159 mm | |
Height | 146 mm | |
Weight | 2,5 kg (with adapter ADC-18) 2,7 kg (with battery BTR-09) |
Additional Information
Download Fujikura 70S Data Sheet.
Download Fujikura 70S Operating Manual.
Video
Package Contents
- Fusion Splicer Fujikura 70S — 1 pc.
- Fiber Optic Cleaver Fujikura CT-06A — 1 pc.
- Detachable Battery BTR-09 — 1 pc.
- Battery charge cord DCC-18 — 1 pc.
- Power adapter/Charger adapter ADC-18 — 1 pc.
- Power cord ACC-XX — 1 pc.
- Spare electrodes
- USB cable USB-01 — 1 pc.
- J-plate JP-05 — 1 pc.
- Alcohol dispenser AP-01 — 1 pc.
- Screwdriver SD-01 — 1 pc.
- CD with Data Connection Software and Video Instruction Manual — 1 pc.
- Short guide — 1 pc.
Video
Customers Feedback
Compare
No items in compare list
Compare