Mass Fusion Splicer Fujikura 88R12

id: 892877
Made in Japan
22 kg
Availability in stock: HK
Warranty: 24 month (s)
Fusion splicer designed to splice up to 12 fiber ribbon cables simultaneously. Self cladding alignment with melting surface tension. Splicing time: 11-12 sec, heat time: 13-15 sec.
USD 8200.00
Add to cart
USD 8200.00
Add to cart
Add to wishlist
Impossible to estimate the shipping cost
Note! This item is shipped within 7 working days.

Fujikura 88R12 is a mass fusion splicer designed to splice up to 12 fiber ribbon cables simultaneously. The wide electrode gap melts the fibers uniformly and has real-time arc discharge control by analyzing the arc’s brightness intensity. The 88R12 does not have active core alignment mechanisms, however, during the discharge, fiber surface tension effects minimize preexisting offsets.

The 88R12 mass fusion splicer includes a spare set of 12 fiber V-grooves with electrodes installed and ready to splice as part of the standard package. These spare V-grooves are field replaceable, so your downtime is minimized.


  • Splicing time: 11-12 sec (SM FAST mode).
  • Heat time: 13-15 sec (single 60 mm mode).
  • Splice up to 12 fiber ribbon cables simultaneously.
  • V-groove assembly, that can be quickly and easily replaced in the field, minimizing downtime and maximizing productivity.
  • Real-time arc discharge control by analyzing the arc’s brightness intensity.
  • Features simple sleeve positioning with its designated centering area on top of the tube heater.
  • Automatic cleaver blade management by wireless communication data connectivity when the splicer judges the blade is worn.
  • Wireless link to ribbon fiber stripper to change settings to adequate one according to the ribbon fiber type to be spliced.
  • Automated open-close wind protector and heater.
  • Universal fiber holder, ribbon stripper and tube heater.
  • Work tray with large capacity storage built in the carrying case.
  • The lid of the carrying case may be used as a work table.

Technical Specifications

Fiber alignment method Self cladding alignment with melting surface tension
Fiber count can be spliced Up to 12 fiber ribbons
Applicable fiber fiber type Single mode optical fiber
Multi mode optical fiber
cladding diameter Approx.125μm
Applicable coating Fiber holder cleave length: 10 mm
Fiber splice performance splice loss ITU-T G.652: avg. 0.05 dB
ITU-T G.651: avg. 0.02 dB
ITU-T G.653: avg. 0.08 dB
ITU-T G.655: avg. 0.08 dB
ITU-T G.657: avg. 0.05 dB
splice time SM FAST mode: avg. 11 sec - 12 sec
SM AUTO mode: 16 sec - 11 sec
Applicable protection sleeve sleeve type heat shrinkable sleeve
sleeve length max. 66 mm
sleeve diameter max. 6.0 mm before shrinking
Sleeve heat performance heat time 40 mm FP-05 mode : Avg. 38 to 40 sec
40 mm FP-04T mode : Avg. 17 to 19 sec
Single 40 mm mode: Avg. 14 to 16 sec
Single 60 mm mode: Avg. 13 to 15 sec
Fiber tensile test force approx. 2.0 N
Electrode life approx. 1,500 splices
Dimensions (W × D × H) 170 × 173 × 150 mm
Weight 2.6 kg (with battery)
Environmental condition temperature operate: -10°C - +50°C
storage: -40°C - +80°C
humidity operate: 0% - 95% RH non-condensing
storage: 0% - 95% RH non-condensing
altitude max. 3,700 m
AC adaptor input AC 100 to 240 V, 50/60 Hz, max. 1.5 A
Battery pack type rechargeable lithium-ion
output approx. DC 14.4 V / 6,380 mAh
capacity approx. 165 splice and heat cycles
temperature recharge: 0°C - +40°C
storage: -20°C - +30°C
battery life approx. 500 recharge cycles
Display LCD monitor TFT 5 inches with touch screen
magnification Approx. 20X : 12 ribbon to 60X : single
Illumination V-grooves LED lamp
Interface PC USB2.0 Mini B type
external LED lamp USB2.0 A type
approx. DC 5 V, 500 mA
ribbon stripper Mini DIN 6 pin
DC 12 V, max. 1 A
wireless Bluetooth 4.1 LE
Data storage splice mode 100 splice modes
heat mode 30 heat modes
splice result 20 000 splices
splice image 100 images
Screw hole for tripod 1/4-20UNC
Other features automatic functions splice mode select by fiber type analysis
discharge power calibration
wind protector: open/close
heater lid: open/close
heater clamp: open/close
reference guide video and PDF file stored in splicer
electrode replaceable without tool

User Manual

PDF  Download Fujikura 88R12 User Manual.

Package Contents

  • Fusion Splicer Fujikura 88R12 — 1 pc.
    • Battery Pack (BTR-15) — 1 pc.
    • AC Adapter (ADC-20) — 1 pc.
    • AC Power Cord (ACC-14, 15, 16 or 17) — 1 pc.
    • USB Cable (USB-01) — 1 pc.
    • Fusion Splicer Strap (ST-02) — 1 pc.
    • Electrodes (on spare V-groove) (ELCT2-16B) — 1 set.
    • 12 fiber V-groove (spare) — 1 pc.
    • Hexagonal Wrench (HEX-01) — 1 pc.
    • V-groove Cleaning Brush (VCB-01) — 1 pc.
    • Carrying Case (CC-39) — 1 pc.
    • Work Tray Left (WT-09L) — 1 pc.
    • Work Tray Right (WT-09R) — 1 pc.
    • Work Tray J-Plate (JP-09) — 1 pc.
    • Tripod Screw (TS-03) — 1 pc.
    • Carrying Case Strap (ST-03) — 1 pc.
    • Alcohol Dispenser (AP-02) — 1 pc.
    • Quick Reference Guide (QRG-03-E, C or J) — 1 pc.
  • Ribbon Fiber Stripper (RS03 or RS02) — 1 pc.
    • Battery Pack (BTR-12A) — 1 pc.
    • AC Adapter (ADC-09A) — 1 pc.
    • AC Power Cord (ACC-08, 09, 10, 11 or 12) — 1 pc.
    • Blade Cleaning Brush (BRS-02) — 1 pc.
    • Hexagonal Wrench (HEX-01) — 1 pc.
  • Single Fiber Stripper (SS03 or SS01) — 1 pc.
  • Optical Fiber Cleaver (CT50) — 1 pc.
    • Fiber Strap Collector (FDB-05) — 1 pc.
    • Fiber Setting Plate (AD-10-M24) — 1 pc.
    • Case (CC-37) — 1 pc.
    • Hexagonal Wrench (HEX-01) — 1 pc.
Mass Fusion Splicer Fujikura 88R12 - Short description
Mass Fusion Splicer Fujikura 88R12
USD 8200.00
Add to cart

Customers Feedback

Chat with us
English Online Español Online Русский Offline Technical Support Online
See the entire catalogue
You have no
Sales chat
 English online
 Español online
 Русский offline
 Technical Support online
No items in compare list
Sales chat