Catalog by Fibretool

Computer-controlled automatic cutting and winding equipment used in the fiber optic patch cord production industry. Cutting cable diameter: 0.9, 2.0. 3.0 mm

Corner pressure polishing machine for fiber connectors (Ø2.5 mm PC, APC / Ø12.5 mm PC, APC / MT, mini-MT).

24-port FC/PC fiber optic connector polishing fixture.

24-port LC/APC fiber optic connector polishing fixture.

24-port ST/PC fiber optic connector polishing fixture.

24-port SC/APC fiber optic connector polishing fixture.

Rubber polishing pads used for fiber optic connectors production.

100 sheets/set polishing films for optical connectors and bare fiber processing. Grit: 30 µm.

100 sheets/set polishing films for optical connectors and bare fiber processing. Grit: 9 µm.

100 sheets/set polishing films for optical connectors and bare fiber processing. Grit: 1 µm.

100 sheets/set final polishing films for optical connectors and bare fiber processing.

Three working modes: return loss test, optical power and loss test and stable laser source.

High perfirmance microscope for fiber connector end face inspection. Optical magnification: 400x.

Oven for heating up all kinds of optical fiber connectors (1.25 mm, 2.5 mm, SC/FC/ST/LC/MPO/MTRJ).

Pneumatic crimping machine for most types of fiber connectors (FC/SC/ST/LC/MU/MTRJ/E2000 connectors etc.)

Epoxy Planetary Centrifugal Mixer with a 100 ml disposable container. Used for fiber optic connector production.

Device for injecting epoxy adhesive into ceramic ferrules for fiber optic connectors.

Used for crimping optical fiber connectors: : .042", .068", .128", .137", .151", .178", .187" (Hex).

Two-component heat curing epoxy adhesive, also known as fiber bonding agent for the production of optical components

Two-component heat curing epoxy adhesive, also known as fiber bonding agent for the production of optical components. Capacity: 4.4 g.