Catalog Offers

Four-channel digital oscilloscope with 50 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate.

Desktop 2-channel phosphor digital oscilloscope with 200 MHz bandwidth, 1 GSa/s real-time sample rate, 14 MB memory, 7.0" display and up to 400,000 waveforms/sec capture rate.

Multipurpose repair kit designed specially for recovery of huge circuit boards such as motherboards. Power: 2500 W.

4-channel phosphor oscilloscope with 200 MHz bandwidth, 1 GSa/s real-time sample rate, 14 MB memory, 7.0" display and up to 400,000 waveforms/sec capture rate.

2 channels. 100 MHz bandwidth. 1 GSa/s maximum real-time sample rate, 25 GSa/s maximum equivalent sample rate. 1 Mpts memory depth.

Compact design, temperature display, hot air gun auto switch-off, 50 W soldering iron, 350 W hot air gun, soldering iron and hot air gun temperature range: 80-480°C.

Dual-channel function/arbitrary waveform generator with 30 MHz max. output frequency, 150 MSa/s sample rate, 14 bits vertical resolution.

4-channel phosphor oscilloscope with 100 MHz bandwidth, 1 GSa/s real-time sample rate, 14 MB memory, 7.0" display and up to 400,000 waveforms/sec capture rate.

Compact and lightweight soldering iron with high output ceramic heater (70 W max.). Temperature setting range from 250°C to 450°C.

Dual-channel function/arbitary waveform generator with 60 MHz max. output frequency, 150 MSa/s sample rate, 14 bits vertical resolution.

Assemble a motorcycle powered by salt water fuel-cell that can drive constantly for up to 7 hours and perform stunning movements. Made in Taiwan.

Powerful (90 W) ESD safe soldering station with LCD display, temperature adjustment from 80 °C to 480 °C and temperature stability of ±2 °C.

Four-channel digital oscilloscope with 70 MHz bandwidth, 1 GSa/s real-time sample rate, 7" display and up to 30,000 waveforms/sec capture rate. 16-channel logic analyzer.

An amazing kit designed to build three robots powered by batteries: a forklift, a rover, and a gripper. Made in Taiwan.

Soldering station for operation with soldering tips of Hakko T12 standard. Soldering iron power: 70 W, heat gun power: 350 W. The package includes one original Hakko tip.

This True RMS clamp meter measures AC/DC voltage and current, resistance, capacitance, frequency, NCV, and is also used to perform diode and continuity testing.

Reliable, cost effective, DMM for measuring AC/DC voltage, AC/DC current, resistance (2 and 4 wire), capacitance, frequency, temperature, and performing diode test,

Dual-channel oscilloscope with up to 100 MHz bandwidth, 1 GSa/s sampling rate, 240 KB storage depth, and 7'' TFT touchscreen (800 × 480).

Compact soldering iron designed with anti-static protection and 100 °C to 400 °C adjustable temperature. Power consumption: 65 W.

Temperature display, hot air gun auto switch-off, 72 W soldering iron, 350 W hot air gun, soldering iron and hot air gun temperature range: 80-480°C.

Hot air rework system with soldering power: 90 W, hot air power: 1000 W.

Hot air rework station for soldering and desoldering SOIC, CHIP, QFP, PLCC, BGA, etc. Hot air gun power: 580 W. Temperature range: 100-450°C.

Digital soldering iron with sleep mode (the temperature drops to 80°C). Power: 60 W, output temperature: 80 - 500°C, heat-up time: 8 seconds.

Core-to-core alignment system fusion splicer for SM, MM, DS, NZDS(G655), EDF and other fibers. Splicing time: 8 s, heating time: 35 s.