Catalog by UNI-T

Portable LPG tank level checker with two-color LED indication based on ultrasonic detection technology

Measurement of insulation resistance in the range of 0.5 MΩ to 100 GΩ with test voltages of 500 to 12000 V in 10% increments in each range, DAR, PI

An earth clamp meter (loop resistance tester) with a 2.4'' color screen and multiple functions: clamping, 3- or 4-wire, voltage/current measurements, data storage/viewing

High-precision leakage clamp meter that can measure up to 1200 A with a large 80×80 mm jaw to clamp up to 96 mm cables and flat-steel ground wires

A professional thermal camera for industrial use with a 4.3-inch IPS display and 5MP digital camera with a manual focus lens

A hand-held battery tester with a voltage range of 0.0001-100 V, automatic real-time detection, USB Type C interface for remote control and data acquisition

Detector for non-contact voltage detection with 2 operating modes: low (24-1000 V) and high (90-1000V) voltage for checking three-phase and industrial installations

Dual-channel generator with a 200 MSa/s sampling rate, 20 MHz maximum output frequency, 16-bit vertical resolution, and a 4.3-inch TFT LCD.

2 analog channels, 56 Mpts max. memory depth, 100 MHz bandwidth, 1 GSa/s real-time sample rate, 150 000 wfms/s waveform capture rate.

Programmable switching single-channel DC power supply. Total power 100 W, output voltage 0~60 V, output current 0~5 A, resolution 10 mV/1 mA.

Digital high-voltage insulation resistance tester, designed with multiple ranges including 250V, 500V, 1000V, 2500V. Data storage: 999 sets.

Dual-channel generator with a 200 MSa/s sampling rate, 40 MHz maximum output frequency, 16-bit vertical resolution, and a 4.3-inch TFT LCD.

Designed to measure AC/DC voltage up to 600 V, AC/DC current up to 10 A, frequency, resistance, capacitance, as well as for continuity and diode testing

A portable device with thermal printing, designed for field hardness testing of large equipment, including roller turboshafts, pressure vessels, turbine sets.

Measures the angle in a variety of applications, designed with a 4-sided magnetic bottom and a two-sided laser design to make the measurement more accurate

Designed to measure laser power in the range of 0 µW~39.99 mW. Equipped with a detection sensor to determine the intensity of a laser beam’s energy output

The tool is designed to measure the vibration acceleration, velocity, and displacement of mechanical equipment.

True RMS meter with a strong anti-interference to EMC interference, and 1000V input protection. Comes with standard gold-plated test leads and gold-plated fine-tipped test leads

True RMS meter with a strong anti-interference to EMC interference, and 1000V input protection. Comes with standard gold-plated test leads and gold-plated fine-tipped test leads

True RMS meter with a strong anti-interference to EMC interference, and 1000V input protection. Comes with standard gold-plated test leads and gold-plated fine-tipped test leads

High-precision, high distance ratio (55:1), and wide temperature range (-50°C–2200°C) non-contact infrared thermometer.

Safe digital light meter with a wide range of measurements, widely used in lighting applications, laboratories, offices, streetlight construction, commercial venues, etc.

Designed for phase sequence and missing phase indication with LCD. No battery required.

Dual channel lightweight handheld oscilloscope with 50 MHz bandwidth, 250 MSa/s sample rate and a set of multimeter measurement functions.