Fusion Splicer Sumitomo Type-82C+

id: 847867
Fusion Splicer Sumitomo Type-82C+
USD 5800.00
Add to cart
Made in Japan
5 (1)
Rate product
12 kg 110, 220 V
Availability in stock: HK
Warranty: 12 months
Direct core monitoring fusion splicer for ultra fast splicing in every environment. Splicing time: 5 s, heating time: 9 s. Read more
USD 5800.00
Add to cart
Add to wishlist
USD 5800.00
Add to cart
Impossible to estimate the shipping cost
Note! This item is shipped within 10 working days.

Sumitomo Type-82C+ is a direct core monitoring fusion splicer for ultra fast splicing in every environment.


  • Ultra fast splicing: 5 sec.
  • Ultra fast heating: 8 sec.
  • Automatic fiber identification (SMF, MMF, DSF, NZDSF, BIF, other).
  • Automatic arc calibration.
  • G.657 fiber auto-splice function.
  • Supports bi-directional splicing operation.
  • Dust-resistant, water-resistant and shock-proof.
  • Compact & lightweight (only 1.9 kg).
  • Touch-screen operation.
  • Upgrades software via internet.
  • Remote interactive maintenance via internet.
  • Equipped with onboard user training video.

Technical Specifications

Optical fiber requirements
Silica glass
Profile types SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657), EDF
Fiber diameter Cladding diameter: 80 µm ~ 150 µm, Coating diameter: 100 µm ~ 1,000 µm
Cleave length 5 ~ 16 mm with coating clamp
Standard performance
Splice loss (typical) SMF: 0.01 dB, MMF: 0.01 dB, DSF: 0.034 dB, NZDSF: 0.03 dB
Return loss (typical) 60 dB or greater
Splice time (typical) 5 sec (SM G652 Quick Mode), 7 sec (SM G652 Std. Mode), 7 sec (Auto Mode)
Heating time (typical) 8 sec (FPS-61-2.6 sleeve, S60 mm 0.25 Quick Mode)
Splice & Heat cycles per battery full charge Approx. 320 (BU-16)
Fiber view & magnification Two CMOS cameras observation, 380X (zoom: 760X) for X or Y single axis view, 270X for both X & Y dual axis view
Proof test 1.96 ~ 2.09N
Applicable protection sleeve 60 mm, 40 mm & Sumitomo Nano sleeves
Splicing programs Max. 300, 74 are pre-optimsed, 226 editable by user
Heating programs Max. 100, 27 are pre-optimsed, 73 editable by user
Splice image capture / Splice data storage 200 images / 10,000 splice data (internal memory only)
50,200/20,000 (with 8GB SD card)
Attenuation splicing 0.1 dB to 15 dB in 0.1 dB increments
Universal clamps Provided, 200 μm, 900 μm tight & loose buer fiber
Reversible coating clamps Provided
Dual automatic independent ovens Provided
User-selectable oven clamp operation Provided
Onboard user training video Provided
Automatic fiber identification SMF / MMF / DSF / NZDSF / BIF / Other
Automatic arc calibration Automatically compensates for environmental condition changes
Display of remaining Splice & Heat cycles Provided (Battery mode)
Wireless LAN connectivity (Option) Provided
DC output DC12 V (for JR-6)
USB port USB 2.0 (mini-B type)
Storage media SD / SDHC memory card MAX32GB
Power supply
AC input AC 100 ~ 240 V, 50/60 Hz (ADC-16)
DC input DC 10 ~ 15 V
Battery pack Li-ion 10.8 V, 6,400 mAh (BU-16)
General Specifications
5.0" touch screen color LCD
Dimensions (W × D × H) 128 mm × 154 mm ×x 130 mm (without anti-shock rubber)
1.9 kg (without battery), 2.2 kg (with battery)
Electrode life 6,000 arc discharges
Software updates Internet
Data management Can be stored, edited and analyzed by dedicated PC software
Operating conditions Altitude 0~6,000 m
Temperature -10~+50°C
Humidity 0~95% (non-condensing)
Wind velocity up to 15 m/s
Storage conditions Temperature -40~+80°C
Humidity 0~95% (non-condensing)
Battery -20~+30°C (long term)
Dust resistance Equivalent to IP5x (Operates normally after 8 hours in a test chamber with circulating dust particles smaller than 75 μm)
Water resistance Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)
Shock resistance Drop from 76 cm on 5 faces (excluding top face)
Impact resistance Equivalent to IK07 on LCD monitor (Protected against 2J impact, it is equivalent to a 500g force from 40cm)

Package Contents

  • Fusion splicer main unit Sumitomo Type-82C+ — 1 pc.
  • Battery pack — 1 pc.
  • AC adapter ADC-16 — 1 pc.
  • Power cord — 1 pc.
  • USB cable — 1 pc.
  • Cooling tray — 1 pc.
  • Spare electrodes ER-10 — 1 pair
  • Quick reference guide — 1 pc.
  • Carrying case with worktable CC-82 — 1 pc.
  • Hand strap — 1 pc.
Youtube video
Youtube video

Customers Feedback

Chat with us
English Offline Español Offline Русский Offline Technical Support Offline
All brands
See the entire catalogue
Sales chat
 English offline
 Español offline
 Русский offline
 Technical Support offline
No items in compare list
Sales chat