Spectrum Analyzer RIGOL DSA1030
id: 837080
Spectrum Analyzer RIGOL DSA1030
Overview
Description
Specifications
Delivery
Payment
Warranty
Discontinued
Overview
9.5 kg 110, 220 V Warranty: 36 months
Compact and lightweight spectrum analyzer for portable applications. The use of digital IF technology ensures reliability and premium performance in most demanding RF applications. Frequency range: 9 kHz to 3 GHz. Read more
Discontinued
Description
RIGOL DSA1030 is a compact and light spectrum analyzer for portable applications. The use of digital IF technology guarantees reliability and premium performance to meet the most demanding RF applications.
RIGOL DSA1030 Spectrum Analyzer Features
- 8,5 inch widescreen LCD display with 800×480 resolution and fine spectral lines for displaying large data sets
- Clear, vivid, and easy-to-use graphical interface with various options such as LAN/USB host, USB device, VGA or GPIB
- Compact and rugged design
- Ideal for many portable and field applications
- Various measurement functions:
- Time domain power
- Channel power
- Adjacent-channel power
- Occupied bandwidth
- Carrier to noise ratio
- Harmonic distortion
- Intermodulation distortion
- Frequency count
- N dB
- Noise marker and so on.
- Automatic setting and functions
- Digital IF design:
- Ability to measure smaller signals measurements. IF filter enables smaller bandwidth settings and greatly reduces the displayed average noise level
- Ability to make out signals with frequency difference of only 10 Hz
- High precision amplitude readings. This technology almost completely eliminates errors generated by filter switching, reference level uncertainty, and scale distortion, as well as errors produced in the process of switching between logarithmic and linear display of amplitude when using a traditional analog design
- Higher reliability. IF technology greatly reduces the complexity of the hardware, the system instability caused by channel aging, and the temperature sensitivity, which can contribute to parts failure
- High measurement speed. Improved bandwidth precision, filter selectivity and minimized scanning time
RIGOL DSA1030 Spectrum Analyzer Technical Specifications
Frequency
| Frequency | ||
|---|---|---|
| Frequency Range | 9 kHz to 3 GHz | |
| Internal Frequency Reference | ||
| Reference frequency | 10 MHz | |
| Aging Rate | <3 ppm/year | |
| Temperature Drift | 20 ºC to 30 ºC | <3 ppm |
| Frequency Readout Accuracy | ||
| Marker Resolution | span / (sweep points-1) | |
| Marker Uncertainty | ± (frequency indication × frequency reference uncertainty +1%
× span +10% × resolution bandwidth + marker resolution) |
|
| Marker Frequency Counter | ||
| Resolution | 1 Hz, 10 Hz, 100 Hz, 1 kHz | |
| Uncertainty | ± (frequency indication × frequency reference uncertainty + counter resolution) | |
| Frequency Span | ||
| Range | 0 Hz, 100 Hz to 3 GHz | |
| Uncertainty | ± span / (sweep points-1) | |
| SSB Phase Noise | ||
| Carrier Offset | 10 kHz | <-88 dBc / Hz typ. |
| 100 kHz | <-100 dBc / Hz typ. | |
| 11 MHz | <-110 dBc / Hz typ. | |
| Bandwidths | ||
| Resolution Bandwidth (-3dB) | 100 Hz | |
| RBW Uncertainty | < 5%, nominal | |
| Resolution Filter Shape Factor (60 dB: 3dB) | <5, nominal | |
| Video Bandwidth (-3dB) | 10 Hz to 3 MHz, in 1-3-10 sequence | |
Amplitude
| Measurement Range | ||
|---|---|---|
| Range | DANL to +30 dBm | |
| Maximum Rated Input Level | ||
| Dc Voltage | 50 V | |
| CW RF Power | RF attenuation ≥ 20 dB | 33 dBm (1W) |
| Max. Damage Level | 40 dBm (10W) | |
| Displayed Average Noise Level (DANL) | ||
| 0 dB RF attenuation, RBW=100Hz, VBW=10Hz, sample detector, trace average ≥ 50 | ||
| DANL (Preamplifier Off) | 100 kHz to 10 MHz | <-85 dBm - 3 f(MHz)dB, typ. -125 dBm |
| 10 MHz to 2.5 GHz | <-138 dBm - 3 × (f/MHz)dB, typ. -130 dBm | |
| 2.5 GHz to 3 GHz | <-115dBm | |
| DANL (Preamplifier Off) | 100 kHz to 10 MHz | <-103 dBm - 3 f(MHz)dB, typ. -143 dBm |
| 10 MHz to 2.5 GHz | <-138 dBm + 3 ×(f/MHz)dB, typ. -148 dBm | |
| 2.5 GHz to 3 GHz | <-133dBm | |
| Level Display | ||
| Logarithmic Level Axis | 1 dB to 200 dB | |
| Linear Level Axis | 0 to Reference Level | |
| Number of Display Points | Normal | 601 |
| Full Screen | 751 | |
| Number of Traces | 3 + math trace | |
| Trace Detectors | Normal, Positive-peak, Negative-peak, Sample, RMS, Voltage Average | |
| Trace Functions | Clear Write, Max Hold, Min Hold, Average, View, Blank | |
| Units of Level Axis | dBm, dBmV, dBµV, nV, µV, mV, V, nW, µW, mW, W | |
| Frequency Response | ||
| 10 dB RF attenuation, relative to 50 MHz, 20ºC to 30ºC | ||
| Frequency Response (Preamplifier Off) |
100 kHz to 3 GHz | <0.7 dB |
| Frequency Response (Preamplifier On) |
1 MHz to 3 GHz | <1.0 dB |
| Input Attenuation Switching Uncertainty | ||
| Setting Range | 0 to 50 dB, in 1 dB step | |
| Switching Uncertainty | fc=50MHz, relative to 10 dB, 20ºC to 30ºC | < (0.3 +0.01 × attenuator settings) dB |
| Absolute Amplitude Uncertainty | ||
| Uncertainty | fc=50 MHz, peak detector, preamplifier off, 10 dB RF attenuation, input signal = -10 dBm, 20ºC to 30ºC |
± 0.4 dB |
| Reference Level | ||
| Range | - 100 dBm to + 30 dBm, in 1 dB step | |
| Resolution | Log Scale | 0.01 dB |
| Linear Scale | 4 digits | |
| Uncertainty | <0.1 dB, nominal | |
| Level Measurement Uncertainty | ||
| Level Measurement Uncertainty | 95% confidence level, S/N > 20 dB, RBW=VBW=1kHz, preamplifier off, 10 MHz < fc< 3 GHz, 20ºC to 30 ºC |
<1.0 dB, nominal |
| RF Input VSWR | ||
| 10 dB RF attenuation | ||
| VSWR | 100 kHz to 10 MHz | <1.8 |
| 10 MHz to 2.5 GHz | <1.5 | |
| 2.5 GHz to 3 GHz | <1.8 | |
| Intermodulation | ||
| Second Harmonic Intercept (SHI) | +35 dBm | |
| Third-order Intermodulation (TOI) | fc > 30 MHz | +7 dBm |
| Spurious Responses | ||
| Image Frequency | <-60 dBc | |
| Intermediate Frequency | <-60 dBc | |
| Spurious Responses, Inherent | <-88 dBm, typ. | |
| Spurious Responses, Others | referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO referenced to harmonic of first LO |
<-60 dBc |
| Input Related Spurious | Mixer level: -30 dBm | <-60 dBc, typ. |
Sweep
| Sweep Time Range | 100 Hz ≤ Span ≤3 GHz | 10 ms to 3000 s |
| Span = 0 | 20 µs to 3000 s | |
| Sweep Time Uncertainty | 100 Hz ≤ Span ≤3 GHz | 5%, nominal |
| Span = 0 | 0.5%, nominal | |
| Sweep Mode | continuous, single |
Trigger Function
| Trigger Source | Free run, Video, External |
| External Trigger Level | 5 V TTL level |
Inputs and Outputs
| RF Input | ||
|---|---|---|
| Impedance | 50Ω | |
| Connector | N female | |
| TG Out | ||
| Impedance | 50Ω | |
| Connector | N female | |
| Probe Power | ||
| Voltage / Current | +15 V, <10% (150 mA) -12.6 V, <10% (150 mA) |
|
| 10 MHz REF In / 10 MHz REF Out / External Trigger In | ||
| Connector | BNC female | |
| 10 MHz REF Amplitude | 0 dBm to 10 dBm | |
| Trigger Voltage | 5 V TTL level | |
| USB | ||
| USB Host | Connector | B plug |
| Protocol | Version 2.0 | |
| USB device | Connector | A plug |
| Protocol | Version 2.0 | |
| VGA | ||
| Connector | VGA compatible, 15-pin mini D-SUB | |
| Resolution | 800×600, 60 Hz | |
General Specifications
| Display | ||
|---|---|---|
| Type | TFT LCD | |
| Resolution | 800 480 | |
| Size | 8.5" | |
| Colors | 65536 | |
| Printer Supported | ||
| Protocol | PictBridge | |
| Remote Control | ||
| USB | USB TMC | |
| LAN Interface | 10/100 Base-T, RJ-45 | |
| IEC/IEEE bus (GIB) | with opt. USB-GPIB | IEEE488.2 |
| Mass Memory | ||
| Mass Memory | Flash disc (internal) USB Disc (not supplied) |
|
| Data Storage Space | Flash disc (internal) | 2 Gbs |
| Power Supply | ||
| Input Voltage Range, AC | 100 V to 240 V, nominal | |
| AC Supply Frequency | 45 Hz to 440 Hz | |
| Input Voltage Range, DC | 10 V to 18 V, nominal | |
| Power Consumption | typ. 35 W, max 60 W with all options | |
| Operation Time at DC Power Supply | about 3 hours | |
| Temperature | ||
| Operating Temperature Range | 5ºC to 40ºC | |
| Storage Temperature Range | -20ºC to 70ºC | |
| Dimensions | ||
| W × H × D | 399 × 223 × 159 mm | |
| 15.7 × 8.78 × 6.26 inches | ||
| Weight | ||
| Without Battery Pack | 6,2 kg | |
| With Battery Pack | 7.4 kg | |
Additional information
Download Rigol DSA1030 Spectrum Analyzer Data Sheet Download Rigol DSA1030 Spectrum Analyzer Options & AccessoriesRIGOL DSA1030 Spectrum Analyzer Package Contents
- RIGOL DSA1030 spectrum analyzer (1 pc.)
- Front panel cover (1 pc.)
- USB cable (1 pc.)
- Power cable (1 pc.)
Specifications
| Max. frequency |
|
Customers Feedback
Compare
No items in compare list
Compare
