RIGOL DG1032Z is a multi-functional arbitrary waveform / function generator which adopts innovative SiFi (Signal Fidelity) technology for stable, high-precision, pure and low distortion signals. The excellent system features, user friendliness and versatile functions combination makes this arbitrary waveform / function generator a perfect solution for IC, serial bus and in-circuit function tests, simulation of sensors and natural environment signals. RIGOL DG1032Z dual channel arbitrary waveform / function generator has an intuitive user interface and simple front panel layout and instructions.
| Standard waveforms | ||||
|---|---|---|---|---|
| Waveforms | Sine, Square, Ramp, Pulse, Noise, Arb | |||
| Sine | 1 μHz to 30 MHz | |||
| Square | 1 μHz to 15 MHz | |||
| Pulse | 1 μHz to 15 MHz | |||
| Ramp | 1 μHz to 500 kHz | |||
| Harmonic | 1 μHz to 10 MHz | |||
| White noise | 30 MHz | |||
| Arbitrary waveform | 1 μHz to 10 MHz | |||
| Max. output frequency | 30 MHz | |||
| Sample rate | 200 MSa/s | |||
| Modulation | AM, FM, PM, ASK, FSK, PSK, PWM | |||
| Square wave characteristic | ||||
| Rise/fall time | <10 ns | |||
| Overshoot | <5% | |||
| Duty cycle | 0.01% to 99.99% (limited by the current frequency setting) | |||
| Jitter | ≤5 MHz 2 ppm + 200 ps | |||
| Pulse wave characteristics | ||||
| Pulse width | ≥16 ns (limited by the current frequency setting) | |||
| Rising/falling Edge | ≥10 ns | |||
| Overshoot | <5% | |||
| Jitter | ≤5 MHz 2 ppm + 200 ps | Ramp wave characteristics | ||
| Linearity | ≤1% of peak output (typical, 1 kHz, 1 VPP, 100% symmetry) | |||
| Symmetry | 0% to 100% | |||
| Arbitrary wave characteristics | ||||
| Waveform length | 8 pts to 2 Mpts (16 Mpts optional) | |||
| Vertical resolution | 14 bits | |||
| Sample rate | 200 MSa/s | |||
| Minimum rising/falling time | <5 ns | |||
| Jitter (RMS) | ≤5 MHz 2 ppm + 200 ps | |||
| Output characteristics | ||||
| Amplitude | ≤10 MHz: 2.5 mVpp to 10 Vpp ≤30 MHz: 2.5 mVpp to 5.0 Vpp ≤60 MHz: 2.5 mVpp to 2.5 Vpp |
|||
| Amplitude accuracy (1 kHz) |
± 1% of the setting + 1 mV | |||
| Amplitude flatness (sine wave, 2.5 Vpp) | ≤10 MHz: ±0.1 dB ≤60: MHz ±0.2 dB |
|||
| DC offset | ||||
| Range | ±5 Vpk ac + dc | |||
| Accuracy | 1% of setting + 5mV + 0.5% of amplitude | |||
| AM modulation | ||||
| Carrier waveforms | Sine, Square, Ramp, Arb (except DC) | |||
| Source | Internal / external | |||
| Modulating waveforms | Sine, Square, Ramp, Noise, Arb | |||
| Depth | 0% to 120% | |||
| Frequency | 2 mHz to 1 MHz | |||
| FM modulation | ||||
| Carrier waveforms | Sine, Square, Ramp, Arb (except DC) | |||
| Source | Internal / external | |||
| Modulating waveforms | Sine, Square, Ramp, Noise, Arb | |||
| Modulating frequency | 2 mHz - 1 MHz | |||
| PM modulation | ||||
| Carrier waveforms | Sine, Square, Ramp, Arb (except DC) | |||
| Source | Internal / external | |||
| Modulating waveforms | Sine, Square, Ramp, Noise, Arb | |||
| Phase deviation | 0° to 360° | |||
| ASK modulation | ||||
| Carrier waveforms | Sine, Square, Ramp, Arb (except DC) | |||
| Source | Internal / external | |||
| Modulating waveforms | 50% duty cycle square | |||
| Key Frequency | 2 mHz to 1 MHz | |||
| FSK modulation | ||||
| Carrier waveforms | Sine, Square, Ramp, Arb | |||
| Source | Internal / external | |||
| Modulating waveforms | 50% duty cycle square | |||
| Frequency | 2 mHz to 1 MHz | |||
| PWM modulation | ||||
| Carrier waveforms | Pulse | |||
| Source | Internal / external | |||
| Modulating waveforms | Sine, Square, Ramp, Noise, Arb | |||
| Width deviation | 0% to 100% of the pulse width | |||
| External Modulation Input | ||||
| Input range | 75 mVRMS to ±5 Vac + dc | |||
| Input bandwidth | 50 kHz | |||
| Input impedance | 1000 Ω | |||
| General specification | ||||
| Display | 3.5-inch TFT LCD (320 × 240 pixels) | |||
| Interfaces | USB Host, USB Device, LAN | |||
| Power | 100 V ～ 240 V (45 Hz ～ 440 Hz), CATII | |||
| Dimentions | 261.5 × 112 × 318.4 mm | |||
| Weight | 4.5 kg | |||
Download RIGOL DG1032Z Data Sheet.
| Channels |
|
| Max. signal frequency |
|
