Catalog by UNI-T

The wire tracker which consists of the transmitter and receiver. This kit can automatically identify open, short, polarity, and quickly distinguish cable failure.

Designed for measuring three-phase AC voltage and current, phase angles between voltages, currents or both, frequency, phase sequence, active, reactive and apparent power, power factor, sum of current vector.

Professional tool used to test cable lines with a variety of cable connectors (RJ45/RJ11/BNC) for short circuit, discontinuity, switched cables, etc.

True RMS digital clamp meter for measuring AC/DC current, AC/DC voltage, resistance, frequency, capacitance, temperature, duty cycle and performing diode check and continuity test.

True RMS multimeter, which measures AC/DC voltage, AC/DC current, resistance and capacitance. Complies with AT III 1000V/CAT IV 600V safety standards.

Device used to measure the coating thickness of the magnetic and non-magnetic conductive matrix in the range up to 1250 μm and 0.1 μm resolution.

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 600 °C. Response time: 250 ms. D:S ratio: 12:1.

AC/DC voltage, AC current, resistance, capacitance, temperature. Diode, continuity tests. NCV measurements.

A digital LCR meter for resistance, capacitance, inductance measurements, and for continuity, diode and transistor tests.

A set of two spare needle-type measuring probes for UNI-T measuring equipment.

Multipurpose infrared pyrometer with backlight for temperature measuring within the range from -32ºC to 400ºC.

This thermometer measures temperature in ˚C, ˚F or K with K-, J-, T-, E-, R-, S-, N-type probes.

Multifunction tester for measuring insulation resistance, voltage, residual-current device (RCD) testing.

An easy-to-use infrared thermometer for non-contact temperature measuring within the range from –20ºC to 400ºC. Equipped with a powerful laser and a backlit LCD.

This sound level meter measures sound intensity within the 30~130 dB range.

Single channel lightweight, handheld oscilloscope with 25 MHz bandwidth, 200 MS/s sample rate and a set of multimeter measurement functions.

AC/DC voltage, AC current, resistance, capacitance, frequency, temperature. Diode test, 3-phase motor sequence test.

A digital multimeter for AC/DC current and voltage, resistance, capacitance, frequency, temperature, duty cycle measurements and diode and continuity tests.

Highly reliable True RMS multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, temperature, continuity, and performs diode testing.

True RMS clamp meter measures AC current, AC/DC voltage, resistance, capacitance, temperature, duty cycle, continuity, and may be used for diode testing.

This vane anemometer measures wind speed, airflow (CFM and CMM) and temperature of mainframe and transducer.

The reliable digital clamp meter for measuring AC current, AC/DC voltage, resistance and performing diode check and continuity test.

The multimeter with 4000 display counts and overload protection. It is an ideal tool for measuring AC/DC voltage and current, resistance, capacitance, frequency, diode and continuity.

Miniature auto-ranging digital light meter used to measure light intensity in the range of from 0 to 199999 Lux.