Catalog by FNIRSI

Portable single-channel oscilloscope with 500 MS/s sampling rate, 100 MHz bandwidth, 2.4" TFT display, and 3000 mAh lithium battery (provides up to 8 hours of operation).

Portable single-channel oscilloscope with 200 kHz bandwidth, 1 MSa/s sampling rate, 1 kB memory depth and 2.4" TFT display.

Portable single-channel digital oscilloscope with 110 MHz bandwidth, 500 MSa/s sampling rate, 240 kB storage depth and 2.4" TFT display.

Dual-channel oscilloscope with a built-in signal generator. Features 100 MHz bandwidth, 1 GSa/s sampling rate, 240 KB storage depth, 7'-inch 800x480 TFT screen.

High sensitivity device, mainly used to monitor the X, γ, and β rays. It is optimal for measuring small changes in radiation levels.

Device designed for testing rechargers, U disks, data cables, power banks, mobile phones, etc.

Compact 1-channel digital signal generator in a protective silicone case. Generates square waveforms with a frequency range of 0.001 Hz - 180 kHz.

Dual-channel oscilloscope with up to 100 MHz bandwidth, 1 GSa/s sampling rate, 240 KB storage depth, and 7'' TFT touchscreen (800 × 480).

A single-channel digital PCB-like oscilloscope equipped with connectors. 200 kHz bandwidth, 1 MS/s sampling rate, 1 kB memory depth.

Pocket-sized single-channel oscilloscope with 3 trigger modes, a bandwidth of 5 MHz, a sampling rate of 20 MS/s, and a memory depth of 40 kB

Portable digital oscilloscope with built-in transistor tester and PWM/AWG signal generator. Equipped with a large 2.4-inch color dot matrix TFT display.

Portable 65W USB-powered soldering iron. Temperature range: 80-420°C. Equipped with temperature control and stabilization, along with a 0.87-inch OLED screen.

Handheld 3-in-1 dual-channel digital oscilloscope with digital multimeter and DDS function generator equipped with a 2.8-inch LCD display and a 3000 mAh Li-ion battery providing up to 6 hours of battery life

Universal two-channel digital oscilloscope with multimeter and signal generator functions, equipped with a 4.3-inch IPS touch screen and a 4000 mAh lithium battery that provides up to 4 hours of battery life

Portable two-channel digital phosphor oscilloscope with bandwidth up to 180 MHz, sampling rate up to 500 MSa/s, and built-in signal generator

Intelligent multimeter with a wide measurement range and high resolution, automatic range selection, monitoring, data recording, and DIY startup interface

Intelligent clamp meter for measuring AC/DC voltage and current, resistance, capacitance, frequency, and temperature. Features waveform display, and power measurement modes

Portable, single-channel oscilloscope with 2.5 MSa/s real-time sampling rate, 200 kHz analog bandwidth and complete trigger functions (single, normal, and automatic)

Portable oscilloscope / transistor tester / signal generator, features a bandwidth of 10 MHz, a sampling rate of 48 MSa/s, supports 13 waveform outputs

Big blade knife-type stainless steel soldering tip for the FNIRSI HS-01BK soldering iron with an internal heating element, suitable for lead-free soldering

⌀ 2 mm small bevel-type soldering tip for the FNIRSI HS-01BK soldering iron and soldering stations using the HAKKO T12 type soldering tips

Compact multimeter designed to measure resistance, voltage, frequency, capacitance, temperature, continuity, NCV, live wire, etc

Max. detection depth: metals 120 mm, non-ferrous metals (copper) 100 mm, AC wire 50 mm, single-strand copper wire 40 mm, wooden 38 mm

Small blade knife-type stainless steel soldering tip for the FNIRSI HS-01BK soldering iron with an internal heating element, suitable for lead-free soldering