Catalog Bestseller

PPM-350C series optical power meter for PON, BPON, GPON, EPON, FTTx networks.

Single fiber fusion splicer. Splicing time: 6-9 s, heating time: 16-25 s. Core loss estimation function, touch panel, Bluetooth 4.1 LE connectivity

Wavelength: 1310/1550 nm. Dynamic range: 39/38 dB. Event dead zone: 0.5 m. Attenuation dead zone: 2.5 m.

4-channel oscilloscope with a 250 MHz bandwidth, 1.25 GSa/s sample rate, 12-bit A/D converter, 50 Mpts memory depth, and a 17.8 cm touch display (1024x600 pixels)

4CH oscilloscope with 100 MHz bandwidth, 2 GSa/s sampling rate, and 100 Mpts memory depth with enhanced math and measurement functions, and a 25.7 cm LCD (1024 x 600 pixels)

2CH oscilloscope with 200 MHz bandwidth, 2 GSa/s sampling rate, and 100 Mpts memory depth with enhanced math and measurement functions, and a 25.7 cm LCD (1024 x 600 pixels)

Dual-channel function/arbitary waveform generator with 120 MHz max. output frequency, 1.2 GSa/s sample rate, 16 bits vertical resolution.

Multi-function semi-automatic infrared BGA rework system with PC synchronization and ceramic emitter for repairing PCBs of Xbox, PS3, laptops, PC motherboards, etc.

2-channel digital oscilloscope with 200 MHz bandwidth and 1 GS/s sample rate, equipped with multimeter and data logger.

Used to measure DC low resistance through 4-wire method. Unknown wire length calculation (FT/M); two-way data transmission by USB interface.

4-channel oscilloscope with a 70 MHz bandwidth, 1.25 GSa/s sample rate, 12-bit A/D converter, 25 Mpts memory depth, and a 17.8 cm touch display with 1024x600 pixels.

4CH oscilloscope with 200 MHz bandwidth, 2 GSa/s sampling rate, and 100 Mpts memory depth with enhanced math and measurement functions, and a 25.7 cm LCD (1024 x 600 pixels)

Electromagnetic Interference Filter and Quasi-Peak Detector Kit for SIGLENT SSA3000X Spectrum Analyzers.

Multipurpose repair kit designed specially for recovery of huge circuit boards such as motherboards. Power: 2500 W.

Programmable high-precision linear DC power supply with 3 output channels and a 220 W max. output power. 4.3-inch TFT LCD.

Mini True RMS digital clamp meter for conducting current, voltage, resistance and capacitance measurements, as well as diode and continuity test.

4-channel oscilloscope with a 100 MHz bandwidth, 1.25 GSa/s sample rate, 12-bit A/D converter, 25 Mpts memory depth, and a 17.8 cm touch display with 1024x600 pixels.

4-channel oscilloscope with built-in single-channel AWG, 125 MHz bandwidth, 1.25 GSa/s sampling rate, 12-bit ADC, and 50 Mpts memory depth

2-channel oscilloscope with a 70 MHz bandwidth, 1.25 GSa/s sample rate, 12-bit A/D converter, 25 Mpts memory depth, and a 17.8 cm touch display with 1024x600 pixels.

High-precision programmable linear DC power supply.

Replacement soldering iron tip with double-sided cut and tin-plated tip for precision component soldering. It is compatible with GOOT PX-251AS, GOOT PX-201, PX-238AS.

Portable single-channel oscilloscope with 500 MS/s sampling rate, 100 MHz bandwidth, 2.4" TFT display, and 3000 mAh lithium battery (provides up to 8 hours of operation).

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 800 °C. Response time: 250 ms. D:S ratio: 30:1.

Two sponges for cleaning soldering iron tips, made of pure cellulose.